Products

  • Antiblocks
    Antiblocks are functional materials that are designed to create micro-roughness on the surface of the film in order to prevent sticking.
    MB SmartВlock
    functional material

    used in the manufacture of products from with percentage of natural silica: with percentage of synthetic silica:
    polyethylene NS20 PE: 20%
    NS50 PE: 50%
    QS50 PE: 50%
    SS1010 PE: 10%
    polypropylene SS52 HPP: 5%
    SS55 HPP: 5%
    TSD52 RPP: 5%
    TSD55 RPP: 5%
    NF63 RPP: 6%
  • Antioxidants
    Antioxidants are functional materials that prevent thermo-oxidative degradation of polymers.
    MВ SmartStab
    functional material
    with 10% active component

    AO10 HPP – used in the production of polypropylene products

    AO10L PE – used in the manufacture of polyethylene products

  • Antistatic
    Antistatic materials are functional materials designed to remove static electricity that occurs in the production of polymer products with dielectric properties, and also prevents its accumulation during the further operation of the finished product.
    MB SmartStat
    functional material

    used in the production of products from with the percentage of antistatic agent:
    polyethylene GA05 PE: 5%
    GA10 PE: 10%
    GA15 PE: 15%
    polypropylene GA15 HPP: 15%
  • Combined
    Combined functional materials are materials that perform several functions simultaneously. This can be a slip-antistatic or a slip-antiblock.
    MB SmartComb
    functional material

    used in the manufacture of products from with percentage of natural anti-block and slipagent: with the content of synthetic anti-block and slipagent in percentage: with the percentage of antistatic and slipagent:
    polyethylene DE15 PE: 10% + slip 5%
    DE25 PE: 25% + slip 5%
    SE55 PE: 5% + slip5 % AGA15 PE: 10% + slip 5%
    polypropylene SE55 HPP: 5% + slip 5% AGA15 HPP: 10% + slip 5%
  • Modifiers
    Modifiers are functional materials based on polyolefin elastomers that increase the frost and impact resistance of polymer products.
    MCOM SmartFlex PE08830 PE

    functional material that increases frost resistance and impact resistance.
    MB SmartBond SG2 PE

    functional material functionalized with maleic anhydride.
  • Processes
    Processors are functional materials that reduce the stress on the extruder by means of an active ingredient that is evenly distributed on the barrel walls, screw and die and prevents the formation of fouling. The use of processing improves the processability of the extrusion process and neutralizes surface defects in the final product.
    MB SmartLub
    functional material
    used in the production
    of polyethylene products

    GF2.5 PE with 3% fluoropolymer content
    GF2.5A PE with 3% fluoropolymer content
    (heat stabilized)
    GF3.5 PE with a fluoropolymer content of 5%
    GF3.5 LS PE with 5% fluoropolymer content
    (high-temperature functional material (over 300°C))
    CL5.0 PE functional material with an active component content of 5%.
    Without the use of fluorine-containing components. Recommended for
    production of polyethylene products in contact with foodstuffs
  • Light stabilizers
    UV stabilizers are functional materials that prevent the degradation of polymers under the influence of ultraviolet radiation and therefore prolong the service life of the final product.
    MB SmartUVS
    functional material

    applied in the manufacture of products from percent content of the active ingredient: percent active ingredient content:
    polyethylene TC20 PE: 20%
    PS20 PE: 20%
    ТС2050 PE: 20%+50%
    PS1050 PO: 10%+50%
    polypropylene PS20 HPP: 20%
    PS30 HPP: 30%
    PS2050 HPP: 20%+50%
  • Slip
    Slip are functional materials that are used to provide a sliding effect to the films, to facilitate removal of the product from the mold during injection molding, and to reduce the coefficient of friction on the metal parts of the extruder.
    МВ SmartSlip
    functional
    material containing
    erucamide 5%

    E5 PE – used in the production of polyethylene products

    E5 HPP – used in the production of polypropylene products

  • Dyes and functional fillers
    MB SmartWhite
    white dye
    used in the production
    of polyethylene products

    percentage of content TiO2: T50 PE: 50%, T60 PE: 60%, T70 PE: 70%

    COM SmartPearl
    pearl dye
    used in the production
    of polypropylene products

    CTP433 HPP

  • Catalog of Chemical Raw Materials
    - Refined erucamide
    - Ethoxylated alkylamine of plant and animal origin
    - Refined glycerol monostearate
    - Fluoroelastomers
  • Development of individual formulas